Embedded Files
The mystery object 1
The mystery object 1
Draw the object described below and label the different parts of the object.
The mystery object is a metal container which is used for boiling water.
It consists of 4 main parts: a vessel, a lid, a spout and a handle.
The vessel is 7 inches high.
It is hollow and spherical in shape.
The base is flat and circular.
It has a diameter of 6 inches.
On the top of the vessel, there is a convex lid with a plastic knob in the middle.
The lid is 5 inches in diameter.
Above the lid is a curved handle which is covered with plastic at the middle part.
At the side of the vessel is a conical spout for pouring water out of the vessel.
The mystery object 2
The mystery object 2
Draw the object described below and label the different parts of the object.
The mystery object is a small electrical appliance.
It consists of 5 main parts: a body, two slots, a lever, a control knob, and a crumb tray.
The body is rectangular with rounded edges.
The two slots are on the top surface and are rectangular in shape, each about 1 inch wide.
On the side of the body, there is a lever that you press down to start toasting.
Next to the lever, there is a control knob used to adjust the browning level.
At the bottom, there is a removable crumb tray to collect crumbs.
The object is about 7 inches long, 5 inches wide, and 6 inches high.
Its exterior is made of stainless steel, but the lever and control knob are made of black plastic.
There are ventilation holes on the sides to prevent overheating.
It stands on four small rubber feet to stop it from sliding.
The mystery object 3
The mystery object 3
Draw the object described below and label the different parts of the object.
The object consists of 6 main parts: a body, a paper tray, a paper output slot, an ink cartridge compartment, a control panel, and a power button.
The body is rectangular and usually made of plastic.
The paper tray is located at the back or bottom and is used to hold sheets of paper.
On the front side, there is a paper output slot where the printed pages come out.
Inside the body, there is an ink cartridge compartment that holds the ink cartridges.
On the top or front, there is a control panel with buttons and sometimes a small screen to choose functions.
There is also a power button to switch the machine on and off.
The object is about 16 inches wide, 12 inches deep, and 6 inches high.
It is usually black or white, and its surfaces are smooth.
It has moving parts inside to pull paper and spray ink.
The back side often has cables or wireless connection ports.
The mystery object 4
The mystery object 4
Draw the object described below and label the different parts of the object.
This object is made to bring light to a small area, like a desk or a workbench.
It usually has a round base made of metal or heavy plastic, about 6 to 8 inches wide, to stay in place.
The arm is long and thin, shaped like two or three straight bars, often made of aluminium or steel, connected with springs and screws.
The head is a cone or dome shape, about 5 inches wide, and it can turn in different directions.
You can move the arm up, down, and sideways because of the springs and hinges.
It works with electricity: you plug it in and switch it on.
Inside the head, there is a lightbulb that gives a bright, focused light.
Most are black, white, silver, or red, sometimes with a shiny finish or matte paint.
The whole object is about 20 to 30 inches high when fully open.
The design lets you put the light exactly where you need it, for reading, drawing, or working.
This object is called an angle-poise lamp.
MYSTERY OBJECTS 1, 2, 3, 4
LISTENING COMPREHENSION
MYSTERY OBJECTS 1, 2, 3, 4
LISTENING COMPREHENSION
Page updated
Google Sites
Report abuse